phishphan

Hello,

I want to use an Eheim 2026 for my 90-P. What size Lilly Pipes would work with this filter? I believe the hose size is 16/22. Can I use the ADA clear hose with this filter? IF so which size?

Thanks,

Neely

 

To avoid seeing this ad in our forum please register at AquaticPlantCentral.com By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.

jsenske

If both the inflow and outflow are 16/22 mm, then you use the 17mm Lily Pipes = Inflow: V-7 17mm, outflow: P-6 17mm.

But for the 90-P I recommend an Eheim 2217 because the inflow is 17mm (so you'd use Lily Pipe Inflow V-7 17mm, which fits fine) and the outflow tubing is 13mm, so you use Lily Pipe outflow P-4 13mm. This P-4 13mm outflow is the prescribed size for a 90-P. The 17mm outflow (P-6 17mm) is a little too big for the 90-P.

trebalack

I have a lily pipes 13mm both in & out flow, My problem is where can I find an adjuster for my tubing because I use Rena XP2 .

Thanks.

Art

Left C

From: http://www.aquaticeco.com/subcategor...ectors/62050/0

These may work for you: 62050 Tubing Adapters, Connectors, 5/8" barb x 1/2" barb In Stock $0.98

If you would do this, do you think that you may have flow problems?

roybot73

FWIW, I've got these (http://www.frozencpu.com/products/22...f_Reducer.html) on an XP1 to use with 13mm Lilly knockoffs. I've got no flow issues at all.

I only have about 1 1/2" of original tubing attached to the filter, and then the reducers into the smaller tubing. Works great.

 

To avoid seeing this ad in our forum please register at AquaticPlantCentral.com By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.