Quote:
Originally Posted by Melbourne  b4igo - the reef tanks that share a sump each has its own return pump. There are two float sensors one that shuts off the return pumps if the water level in the sump drops too low and another tops off at a much slower rate via an aqualifter pump. Both tanks are drilled with 1 inch bulkheads but I'm only pumping through about 1/2 what they are rated for with each return pump dialed back a bit. |
Ahh of course...sump... I was stuck in "canister" mode.
As long as the outlet from the tank to the sump can flow more water than the pump is flowing back then there is no problem!
Keen to hear how you finish up with the cube, so I'll follow this thread with interest!
regards,
Mike