Aquatic Plant Central - View Single Post

TAB · 06-19-2009, 12:40 PM

are you sure its acrylic?

a easy way to tell is look at the edges.

are they light or dark? if they are light, it still might be acrylic. if they are dark is polycarb.

the good news is you can use the same "glue" for both.

if it is acrylic or poly carb. you can use weldon 3 or 4 if there is a very tight fit between the piece. weldon 16 if there is not.

06-19-2009, 12:40 PM	#6 (permalink)
TAB Senior Member Join Date: Feb 2009 Location: Fair Oaks Posts: 468 iTrader Ratings: 2 iTrader Positive Rating: 100% Plant Points: 26300	Re: safe sealant to repair UV sterilizer are you sure its acrylic? a easy way to tell is look at the edges. are they light or dark? if they are light, it still might be acrylic. if they are dark is polycarb. the good news is you can use the same "glue" for both. if it is acrylic or poly carb. you can use weldon 3 or 4 if there is a very tight fit between the piece. weldon 16 if there is not.