siliconcarbide

I am going to be building a stand for a 45 gallon tank. I want to have the option to put in a CO2 system. How tall should the space below the tank be to accomodate a gas cylinder? I am leaning toward a 10# size tank.

Thanks,
Alan

TNguyen

http://beveragefactory.com/draftbeer/tanks/co2.shtml

If you click on each tank, the height information should be there. Hope this help. Good Luck

Thanh

dennis

I have a 5# with regulator and needle valve attached, around 21" high. My last 5# tank was a little taller, the whole assembly was about 24". I know that's not much help for a 10# though

djlen

If you add about 2" above the height's given for the different sizes on the site that TNguyen links you to you should be able to accommodate most tanks with regulators attached.
All my regulators only reach about 1" above the on/off knob on top of the tanks.

Len

Bert H

I have two different 10lb cylinders with two different regulators on them, one's 22 inches the other about 23 1/2 inches.

siliconcarbide

Thank you all for your help. Now I am off to the basement to begin sawing wood (not for a nap, rather with a saw).

Alan