Aquatic Plant Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
167 Posts
I've done one before on a rack that had 20 outlets but I'm not sure how you're planning to configure yours... If you like I can post the pics of my old setup as I did a step by step of it for another forum at the time.
 

·
Registered
Joined
·
167 Posts
I was running a stronger amount of PSI (2.9 lbs PSI) than that is rated for and I used 1/2" pvc, closed loop. I attached the correct sized air line to the nipple off the pump and then connected the other end of it to a slip, slip, threaded on the top "t" joint with a brass nipple the same size as the one coming off the pump.

I would think you'd get more pressure with smaller PVC since it has less room to build up pressure in.

Hope this helps and makes sense.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top