Aquatic Plant Forum banner
1 - 2 of 27 Posts

· Registered
1,008 Posts
I have an Acrylic dealer near by (Tap Plastics), but they don't sell anything with 1/8" wall thickness. Bending the 1/16" wall tube is difficult as it collapses very easily. Also, using a curtain rod spring doesn't work real well as a bending spring as the tube tends to conform to the shape of the coil making it near impossible to extract the spring without cracking the tube.
1 - 2 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.