Aquatic Plant Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
151 Posts
i used threaded nipples to attach all the sockets to the hood the outer two are directly attached to the hood the inner two are attached to a exhaust hanger bracket i had laying around that i bent into an L then drilled two holes in the hood cause i didn't have any nuts or bolts and i attached the bracket to the hood with a zip tie the nipples and the sockets were both bought at home depo this is the directions i followed on how to make the hood courtesy of hoppycalif http://www.aquaticplantcentral.com/...ects/45208-diy-mod-perfecto-10-gal-light.html
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top