Aquatic Plant Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
219 Posts
the input going into the canister is 5/8'' while the output going to the tank is 1/2''. You probably could get away with one filter depending on how big of a bioload you are planning. Even with one filter, you always want to make sure you have enough circulation in the tank. So once you set up your filter, if you don't feel you have enough circulation, then another filter would help (if you have the money) or a relatively inexpensive powerhead would be wise). Hope this helps
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top