Aquatic Plant Forum banner

Gilles' 125 gallon tank and 40 gallon sump

70809 Views 122 Replies 51 Participants Last post by  Tex Gal
Well this is my first big post on APC. I've been working with aquariums for about 2 years now, mainly using them as "i have nothing to do, lets trim the aquarium" kind of thing. In other words, i did not take a lot of time to "work" on my aquarium.

My (old) 50 gallon tank:
I have been fascinated with the aquarium even since i first got my first, and when i moved to my appartment i decided to go from a 40L to a 180L aquarium. To convert these values to Gallons, you have to divide them by 3.8. So first i had a ~10 gallon and then i purchased a ~50 gallon.

Not long after i had this 50 gallon tank, i switched from the internal filter to a tetratec EX700 filter, and decided to inject CO2 using an Aquamedic 1000 reactor. Here are some pics of my first aquarium.

My (old/current) 125 gallon tank:
Almost 8 months ago, i switched to a 125 gallon tank and a 40 gallon sump. This has been nothing but a disaster to be honest. The overflow of my tank was wrongly build, and it had no second overflow. A snail got stuck in the overflow to my sump and the pump kept on pumping, well you get the idea.. I had a wet floor 3 times untill i finally got around and knew how to fix it.

The tank has 4x36w T8 lighting, with electronic ballasts, the return is done by a pond pump, and i have a UV filter attached. My electronics where not kept seperate from my water flow, so when the tank flooded i got a short circuit.

The hood of the tank was made from thesame material as my other furniture, meaning 18mm thick plywood. Off course, this was WAY to heavy, but then again, you never know you have to look out for something untill you bump your head.

I am injecting CO2 in such a manner that i have my PH steady at 6.8 with a KH of 5, giving me approx. 30ppm CO2. My lights are dimmed by an aquarium computer, which means i have a beautifull sunset and sunrise.

First i added CO2 directly using an air stone in my sump, but that caused me to use approx. 10kg of CO2/month which is (off course) not good for the environment. Right now i am using a reactor (Dennerle Cyclo Turbo XL) which is driven by a seperate pump in my sump.

I will spare you the other problems i had, but again, here are some pictures of the current tank.

My (new/in progress) 125 gallon tank:
Besides the seperation of the electronics from the water (100% seperated = no more short circuit) i had the idea to incorporate my return lines in my DIY background (made from isolation material, tile glue and epoxy coating) and off course there is a second overflow. There is also going to be a bottom heater and the other (good) parts of my current tank will move to the new tank.

The POND pump will be replaced by a pump which can be found in about every boiler in the world (yes, a boiler pump). These pumps are used a lot in the Netherlands, they have 3 different speed settings ranging from 30,45,60 watts and pumping out 900-1700 gallons per hour. Off course this is going to be less, since i am using a lot of PVC with bends and so on, but you'll get the idea.

The CO2 injection will be done (once again) by a Aquamedic 1000 reactor, which will be incorporated in my return lines. I will have 4 points from where my water will be returned, 3 below water and 1 spraybar which will keep the oily surface away. Besides that, it will also "move" all dead leaves to the overflow.

My lights are going to be upgraded. Instead of 4x36w T8 i am going to use 4x36w T8 and 2x54w T5. The reason i did not switch entirely to T5 is the initial price you have to pay. All in all i am going to end up with approx. 2.1w/gallon, maybe i'll add another two 54 T5's, meaning i'd go to 3w/gallon. All in all, it is way better then my current WPG which is 1.2w/gallon.

The stand will be made from metal piping, and is allready constructed, grounded and painted with hammerite black. Pictures describing the building progress will come very fast, since i am allready half way with the construction.
See less See more
1 - 1 of 123 Posts
Hello Gilles
Our ... Impressive! :shock:
I was surprised with the project filtering Sump, after reviewing ... I was sorry to have purchased a filter Canister! I love it step by step you made, very rare that attend the forum.
Magnificent! My Congratulations! :D

That hug
1 - 1 of 123 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.