Aquatic Plant Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
7,436 Posts
You can buy a brass elbow with 1/8 NPT female threads in both ends. If you install that on the solenoid outlet fitting, so it points horizontally in the direction you want, you can then install the 4-way splitter in the end of that and have the bubble counters vertical as they need to be. You would also need a 1/8 NPT short pipe nipple to install in the end of the splitter in place of the pipe thread to tube fitting that is there now. That nipple screws into the 1/8 NPT elbow.
 
1 - 2 of 2 Posts
Top