Aquatic Plant Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2,330 Posts
Discussion Starter · #1 ·
I want to use a single 5lb CO2 cylinder for both an inline reactor on my 30g and a atomizer on my 10g.

The atomizer is run at high pressure (ie, no bubble counter) and the inline is at low pressure.

I will be getting all my stuff from www.aquatic-store.com.

I called up milwaukee (as I was considering theirs) and was told that the regulator, solinoid and bubble counter used epoxy in the threads and you couldn't take it appart.

Can anyone think of a creative way to run a high and low pressure setup with parts at www.aquatic-store.com ?

Thanks!
 

·
Registered
Joined
·
2,330 Posts
Discussion Starter · #5 ·
Because the conductance is different, you will get different pressures. I THINK I found an option. I called JBJ and they have a 2way manifold (w/ needle valves) accessory. You put it in place of their needle valve and can get an additional bubble counter (which I won't need). Marc has something that fits the description..now I just need to confirm it.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top