Aquatic Plant Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Thanks for the addition to the group. I'm the new kid on the block here as I've come to ask help on getting my 80-gallon tank that is NOT DRILLED set up for plants. As the picture shows, I have a discontinued Pro Clear 150 Wet/Dry Sump to incorporate. I'm seeing HOB overflows but I'm also reading that it's not a preferred method to go. If I drill the tank, are we talking bulkhead here or bottom drilling? In either case what are my best options for plumbing? In-tank overflow box? SO many questions here. But I need a starting point and to do that I need to determine the best direction for maintenance and cost. I will be using CO2 as I already have a 25# canister and regulator. I've got 100# of Eco-Complete and haven't decided on a top substrate yet. My goal is to put together a successful planted tank, with the fish being of second importance.
So, who would like to help mentor me through this process and give some clarity as to how to best approach this?

Thanks!

~David
 

Attachments

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
I run a sumped tank and it's great but sometimes I wish I hadn't set it up this way. There are just more things that can go wrong with a sump.

That being said I would recommend drilling the tank (as long as it's not tempered!). A drilled overflow is safer since you don't have to worry about losing siphon as you do for hang-on back overflows. You will still have to worry about leaves clogging your weir teeth and drains.

The simplest method in my opinion would be to get one of the internal/external low profile overflow kits like the eshopps eclipse or prodigy or something similar from another brand. With a tank, that size you will probably want to run a bean animal drain set up or a the very least a Herbie style drain for extra flood safety.

I use the eshopps eclipse s on my tank and it works well as long as you are careful with the initial alignment. Since my tank is rimmed I did not use the included drill guide as it would have put my water level too low. I have details on my tank's plumbing in my journal if you are interested.
Your setup would better give me at least some barometer as to setting up a similar design on mine. Much appreciate your sharing!
 
1 - 2 of 2 Posts
Top