Aquatic Plant Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
60 Posts
Carlos,

While CO2 is the first thing we need to look for and therefore it's probably the problem, just out of curiosity - u are dosing flourish & flourish iron so you have high iron level (0.43 ppm per day) but what about flourish trace? It contains x8 manganese and x20 zinc than basic flourish. I thought one has to roughly balance things and have enough traces when dosing that much iron. No?

Aviel.
 

·
Registered
Joined
·
60 Posts
Raul-7 said:
Flourish Trace is basically nutrient rich tapwater. There are other ways to add Mg. People have done fine just using Flourish and Flourish Iron, w/out using Trace.
If flourish trace is rich tapwater then flourish is poor tapwater. If so then why add flourish??? If you intend to answer my question then please provide a quantitive answer - elements, percentages, etc.

Aviel.
 
1 - 2 of 2 Posts
Top