Ah supply is great. I just got my 2x55w order a few days ago. I'll admit that I had a little trouble at first as the only picture they had was a wiring diagram, so I didn't know what all of the pieces were for. You'll need stuff like: screwdriver, drill, wire cutters/strippers --- takes a little time if you're not too experienced with wiring and such, but even then, it isn't bad. Be careful and don't do what I did -- when drilling pilot holes for the screws, don't accidentally drill the hole all the way through the enclosure (oops). Enjoy!
thanks for the replies!!!i made a custom hood for that and i have an extra reflector wich im planning to cut it in 2 and place them in the sides of the hood so it will be like all the hood full with reflectors.you think thats a good idea or ill loose more light if i do that?and one more question.how long it takes to deliver after you order?thanks!
36w of cf light is a bodacious amount of light for a 10g. 2 X 13w would've
done just fine for FW planted. Did you get the MIRO4 reflector? You might
want to suspend the light to attenuate its intensity. Still, it might be great
with the right setup: CO2, surface plants, and you'll need a fan if the light
is mounted close to the tank.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.